Indigo Renderer Forum

I'll just put any test pics I do here and I do a lot of em

Just an outdoor lighting series of pics I'm, experimenting with right now and playing around with material

pic cooked for 18mins on a P4 3.14 ghtz 100+ samples. Need to increase my clockspeed for the next test

"metropolis" "true"
"large_mutation_prob" "0.4"
"max_change" "0.03"
"max_num_consec_rejections" "1000"
"max_depth" "1000"
"bidirectional" "false"
"hybrid" "true"

22mins 120 samples on a P4 northwood 3.35ghtz

"metropolis" "true"
"large_mutation_prob" "0.01"
"max_change" "0.03"
"max_num_consec_rejections" "1000"
"max_depth" "1000"
"bidirectional" "false"
"hybrid" "true"

decreased the large mutation prob - much cleaner, but some obvious bright spots...

experimenting with some "glossy transparent SSS" material on the ball...

still don't really understand it yet

30mins 155 samples on a P4 northwood 3.35ghtz

"metropolis" "true"
"large_mutation_prob" "0.01"
"max_change" "0.03"
"max_num_consec_rejections" "1000"
"max_depth" "1000"
"bidirectional" "false"
"hybrid" "true"

I let this one cook for a bit over 2 hours and its seems to be adding more white spots on the wall rather than clearing up

It's over 1000 samples now. MLT hybrid mode

trying some SSS on the statue, but I think my settings need work....

great tests
you may want to use Violet, to get rid of those fireflies

Kram1032 wrote:great tests
you may want to use Violet, to get rid of those fireflies

thanks, but how how will violet help

I wonder if these bright spots are just errors? if not why do they appear?

some test render I did a few weeks back
- this one cooked for about 5 hours 1400 or so samples - pretty clean
I guess this would be a finished render....

if I had a Q6600 quad core cpu running at 3 ghtz, this would have rendered in 50mins

some glossy transparent SSS material testing
doesn't seem all that transparent, but it turns out my object was too big, after setting the exporter scale value to 0.1 then it rendered glassy and see through

Experimenting with SSS. Raw output, no post processing

Rendered for 4.5+ hours on a P4 2.8c Northwood running at 3.2ghtz. You can see the progression in 3 steps.

1) 120+ samples per pixel at the 30 min mark
2) 500+ samples per pixel at the 1.5 hour mark
3) 2091 samples at the 4.5 hour mark

Nice and clean - really surprised all those spots dissappeared

MLT Hybrid rendering mode with super sampling factor of 1

rather suprised that it was not jaggy with just a super sampling of 1, and that made it render much faster too

I scaled this statue down by 0.5 in the Cindigo exporter scaling. At 1.0 it was not as transparent, and at 0.25 touch more transparent and at 0.1 almost like a window

Not sure why the image is so soft and bloomy, maybe Cindigo changed the camera values a bit, as I normally don't fiddle with that stuff, but Cindigo added some entries in the scene for the camera settings

still haven't figured out how to get specularity on this model in SSS yet....

to get some nice reflections on the statue raise the IOR of your medium, also the Precedence should be around 10.
For glossy transparent material the surface loses reflectivity the smaller the exponent gets...

nice testing btw

still haven't figured out how to get specularity on this model in SSS yet....

That's a job for IOR, if superior to 1.

Yup, when the SSS medium has IOR = 1, no reflection will occur at the interface. Raise it to 1.4 or something like that.

thanks for the tips guys

now we're getting somewhere!!!
although I bumped up the settings to much and the feel and material has changed.... it's more like ceramic metallic statue now

Now what are those big white spots for? The image resolves and cleans up and then boom those white spots, but they later dissappear given enough rendering time I assume. Just puzzled as to why they come up...are they mutation points?

white dots = sun

sun reflections?