speed problem [problem SOLVED] ThX y all
speed problem [problem SOLVED] ThX y all
hi all
I have been using indigo 1.0.9_3 since a while, untill yesterday, and i downloaded 1.1.15 but i have the following problem, and i hope you can help me fixing this error, or telling me what i am doing wrong
i have an interior scene with lightings, and it works perfectly in 1093 When I try to render it in 1115, there are no lights at all, whatever the settings, although the Tutorial with the small lamp works!
i reassigned all the materials in 1115. (exterior scenes work perfectly by the way)! my only problem is lights in this new version. if someone could help me please
Thanks, qomop
I have been using indigo 1.0.9_3 since a while, untill yesterday, and i downloaded 1.1.15 but i have the following problem, and i hope you can help me fixing this error, or telling me what i am doing wrong
i have an interior scene with lightings, and it works perfectly in 1093 When I try to render it in 1115, there are no lights at all, whatever the settings, although the Tutorial with the small lamp works!
i reassigned all the materials in 1115. (exterior scenes work perfectly by the way)! my only problem is lights in this new version. if someone could help me please
Thanks, qomop
- Attachments
-
- just to show you an unfinished low res from 1093 that works perfectly
but 1115 gives nothing :( - fe.jpg (206.71 KiB) Viewed 7044 times
- just to show you an unfinished low res from 1093 that works perfectly
Last edited by qomop on Tue Feb 10, 2009 8:18 am, edited 3 times in total.
hi again
i rendered simple scenes with single light, more simpler than the one above, and it works but it is EXTREMELY slow
in 1093 i could see the scene after almost 1 minute rendering, and with my 1115, setted exactly like I used to do, it takes something like 20minutes and the scene still looks weird. although i test in very low resolution (400x200)
i am still managing to see what i can be doing wrong... if anyone could tell me if he has the same problem?
i rendered simple scenes with single light, more simpler than the one above, and it works but it is EXTREMELY slow
in 1093 i could see the scene after almost 1 minute rendering, and with my 1115, setted exactly like I used to do, it takes something like 20minutes and the scene still looks weird. although i test in very low resolution (400x200)
i am still managing to see what i can be doing wrong... if anyone could tell me if he has the same problem?
here is a quick view of what i tested : i thought maybe changing tracing method would fix my problem, but still not.
these are 40 minutes rendering!
whereas in 1093 i had this state in 10 seconds.
i ll download the package again maybe it will change somthing if the one i had was damaged...
EDIT : i tryed again with new pack, nothing... by the way, exterior renders are AWESOME fast!! good Job!
these are 40 minutes rendering!
whereas in 1093 i had this state in 10 seconds.
i ll download the package again maybe it will change somthing if the one i had was damaged...
EDIT : i tryed again with new pack, nothing... by the way, exterior renders are AWESOME fast!! good Job!
- Attachments
-
- sketchup scene
- Sans titre.jpg (23.77 KiB) Viewed 7031 times
-
- one try in PT
- im1233409792.png (129.19 KiB) Viewed 7035 times
-
- another try with MLT
- im1233410636.png (102.59 KiB) Viewed 7031 times
hi again
so i fixed the problem, i downloaded 1.1.16 and it works but i still noticed that it is slower whi i render scenes such as exactly the one above (room) than in 1.0.9_3
is there a reason why? although Exterior Scenes are AWESOME fast! interior are quite slower.
I ll post samples at many states of this interior scene render later because for the moment i haven t rendered more than 40 minutes long with 1116
C U
qomop
so i fixed the problem, i downloaded 1.1.16 and it works but i still noticed that it is slower whi i render scenes such as exactly the one above (room) than in 1.0.9_3
is there a reason why? although Exterior Scenes are AWESOME fast! interior are quite slower.
I ll post samples at many states of this interior scene render later because for the moment i haven t rendered more than 40 minutes long with 1116
C U
qomop
so these are diffferent renders at same time
same scene or same type : interior with multiple light sources
according to the Advanced feature tutorial i setted the tracing method to Bidirectional for interior scenes, but since there are many direct lights and indirect lights i tryed both methods and i will try hybryd later
I started tryng interior scenes with lights this week so i don t know how to set correctly if somone can give me advice, but in my opinion, Bidirectional PT has been the fastest and the more accurate since i use Indigo.
same scene or same type : interior with multiple light sources
according to the Advanced feature tutorial i setted the tracing method to Bidirectional for interior scenes, but since there are many direct lights and indirect lights i tryed both methods and i will try hybryd later
I started tryng interior scenes with lights this week so i don t know how to set correctly if somone can give me advice, but in my opinion, Bidirectional PT has been the fastest and the more accurate since i use Indigo.
- Attachments
-
- so here is an attempt on Bidirectinal MLT at 30 minutes on 1.1.16 with SK1.1.15
- 11111111111.jpg (289.16 KiB) Viewed 6973 times
-
- here is an attemps on bidirectional PT at 30 mnute on 1.1.16 with SK1.1.15
- 22222222222222.jpg (301.75 KiB) Viewed 6974 times
-
- and here is a scene on 1.0.9 and SK1.0.9 at 30 minute too!
- 333333333333.jpg (176.13 KiB) Viewed 6974 times
here are both renders at almost 9h of rendering
i changed point of view but since it is the same room and same light setting and almost same distance from all light sources it shouldn t afffect so much rendering time.
i changed point of view but since it is the same room and same light setting and almost same distance from all light sources it shouldn t afffect so much rendering time.
- Attachments
-
- 1.1.16 at 9H of rendering
- 9h.jpg (567.68 KiB) Viewed 6960 times
-
- 1.0.9 at 9h or rendering
- fe.jpg (206.71 KiB) Viewed 6957 times
- kellpossible
- Posts: 97
- Joined: Thu Nov 27, 2008 5:46 pm
- Location: Australia
hin thanks for answering
yes i think i ll post it to the general forum. i got the reglex to put it here only because i m Skindigoer
Ctzn : what is the scale? sorry i don t understand. you mean the render output? it was the same for all : 1374X630, for final tests i always set it to "view" in sketchup
qomop
yes i think i ll post it to the general forum. i got the reglex to put it here only because i m Skindigoer
Ctzn : what is the scale? sorry i don t understand. you mean the render output? it was the same for all : 1374X630, for final tests i always set it to "view" in sketchup
qomop
- kellpossible
- Posts: 97
- Joined: Thu Nov 27, 2008 5:46 pm
- Location: Australia
Who is online
Users browsing this forum: No registered users and 129 guests